polarpublications.blogg.se - Zebra setup utilities for mac

#Zebra setup utilities for mac install
#Zebra setup utilities for mac serial
#Zebra setup utilities for mac drivers

If the print is too faint, you can modify the darkness settings using the Zebra Printer Utilities in OnArrival.If OnArrival times out on printing the badge, send the job again.Verify the spelling of the ESSID access point. If that information is correct, repeat the option to Configure Printer Connectivity. If the printer has communicated on the network, the IP assigned to it should be listed. For Duke networks, go to and verify the MAC address. or shows an IP number starting with 192.x.x.x, the printer does not have an IP number assigned. If the printer does not show an IP address starting with 10.x.x.x.There is a significant lag in communication and if you are prompted for a login and password, you can enter "admin" and "1234". Depending on your network, you may be able to enter the IP address of the printer in a web browser window where you can modify settings.The settings for the printer are under the Gear -> Zebra Utilities. You can modify some settings using the OnArrival App.

You can modify printer settings using the Zebra Setup Utilities on a Windows computer.Enter 9100 for the port and click the back arrow.

Select Printer and enter the IP address of the printer as shown on the display.

Choose WiFi for the printer connection.

Launch the app and login, then click the Gear.

IMPORTANT: the iPads and the printers must be on the same network.

After a few seconds, the printer display should show an IP address starting with 10.x.x.x.

You should see some activity on the printer. Click Next and click Finish to complete the wizard.

Click Next making sure the Final screen appears to send the settings to the printer.

Click Advanced Settings and in the General section, change Preamble from Long to Short.

For DukeOpen, this should not be necessary. If there is a password associated with the network, enter that.

For the ESSID field, enter the wireless network (ex.

Verify that DHCP is selected then click Next.

Select the Configure printer connectivity option and select Wireless -> Next.

If this was successful, the printer should be listed. Wait until the printer display shows PRINTER READY then click Finish.

Connect the USB cable from the printer to the Windows computer and turn the printer ON.

#Zebra setup utilities for mac serial

After this completes, choose USB (Universal Serial Bus) as your connection.

#Zebra setup utilities for mac drivers

The drivers for the printer will be installed first.

#Zebra setup utilities for mac install

This is required in order to install and configure the printer.

Permit the app to make changes to your device.

NOTE: if you will need to manage the printer settings regularly, you can select the option to Install Zebra Setup Utilities on your local computer.

Select the appropriate printer model (Zebra may have several models listed on the same media).

You can also download the installers and printer tools at.

Using a Windows computer, insert the CD disk and install the drivers and printer tools.

If you plan to use any Duke wifi networks, go to and register a new device and supply the printer MAC address which is located on the bottom of the printer.

It should be "off" until the directions indicate it should be powered on. The printer used to prepare this document was the Zebra GX420d with Wifi connectivity.